-
Configuration Considerations for uRPF
Last Updated
Sep 03, 2026
8100 and ICX 8200 devices. ICX 7850, ICX 7650, ICX 7550 Considerations Per-interface level configuration is available on VE interfaces and physical ports only. IPv4 and IPv6 unicast routed packets are subjected to uRPF check on ICX 7850 and ICX 7650 devices. Scaling numbers are reduced by half for
-
Changing the Number of Load Sharing (ECMP) Paths for IPv4
Last Updated
Sep 03, 2026
ECMP Load Sharing Paths per Device ICX 7150 / ICX 7250 / ICX 7450 / ICX 7550 ICX 7650 / ICX 7850 8 32 For optimal results, set the maximum number of paths to a value at least as high as the maximum number of equal-cost paths your network typically contains. For example, if the Layer 3 switch you are
-
Configuration Considerations for uRPF
Last Updated
Sep 03, 2026
packets, or OpenFlow is configured. Counters or logging information is unavailable for uRPF hits. After enabling reverse path check, you must reload the device for uRPF to be programmed. Tunnel over user VRF should not be configured on a device on which uRPF is enabled. ICX 7850, ICX 7650, ICX 7550, ICX
-
Configuration Considerations for uRPF
Last Updated
Sep 03, 2026
7150, ICX 8100, and ICX 8200 devices. ICX 7850, ICX 7650, ICX 7550 Considerations Per-interface level configuration is available on VE interfaces and physical ports only. IPv4 and IPv6 unicast routed packets are subjected to uRPF check on ICX 7850 and ICX 7650 devices. Scaling numbers are reduced by
-
Allocating TCAM Space
Last Updated
Sep 03, 2026
allowed. For ICX 7550, ICX 7850, ICX 8100, and ICX 8200 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command in the Ruckus FastIron Command
-
site (VXLAN)
Last Updated
Sep 03, 2026
site (VXLAN) site (VXLAN) site (VXLAN) Creates one remote site for the VXLAN overlay gateway. site site-name no site site-name A remote site is not configured. site-name Specifies the name of the remote site. Overlay-gateway configuration mode This command is supported only on RUCKUS RUCKUS ICX
-
Campus Fabric
Last Updated
Sep 03, 2026
Campus Fabric Campus Fabric Campus Fabric Campus Fabric is also referred to as Switch Port Extender (SPX). Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 802.1BR control bridge No No No No 8.0.80 8.0.40 8.0.95 802.1BR port extender 8.0.70 The ICX 7150-C08P does not support
-
DHCP - Dynamic Host Configuration Protocol
Last Updated
Sep 03, 2026
DHCP - Dynamic Host Configuration Protocol DHCP - Dynamic Host Configuration Protocol DHCP - Dynamic Host Configuration Protocol Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 BootP/DHCP relay 8.0.60 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 Specifying which IP address will
-
PoE/PoE+ - Power over Ethernet
Last Updated
Sep 03, 2026
PoE/PoE+ - Power over Ethernet PoE/PoE+ - Power over Ethernet PoE/PoE+ - Power over Ethernet Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 In 08.0.50, when the ICX 7750 is a control bridge (CB) in a campus fabric configuration, it can control PoE on port extender (PE) units. In
-
DHCP - Dynamic Host Configuration Protocol
Last Updated
Sep 03, 2026
DHCP - Dynamic Host Configuration Protocol DHCP - Dynamic Host Configuration Protocol DHCP - Dynamic Host Configuration Protocol Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 BootP/DHCP relay 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70 08.0.90 Specifying which IP address will be