Configuring Device IP Address Settings
If you want to update the IP address and
DNS server settings of your Master AP, complete the following steps.
Note: As soon as the IP address has been changed
(applied), you will be disconnected from your web interface connection to the
Master AP. You can log in to the web interface again by using the new IP address
in your web browser.
Complete the following steps to change the IP address settings:
- Go to Admin & Services > System > IP Settings.
- Review the
IP Settings options.
Note: Upon enabling Gateway mode, all devices will reboot immediately. Refer to Gateway Mode.
- Under WAN IP Address,
select one of the following options:
- Manual: If you select Manual, enter the correct information in the active fields (IP Address, Netmask, Gateway, Primary DNS Server, Access VLAN are required).
- DHCP: If you
select DHCP, for Access VLAN,
enter the VLAN ID.
Note: The default value of the VLAN ID is 1. VLAN is configurable only in the Dedicated mode.
- Click Apply to save your settings. You will lose connection to the Master AP.
- To log in again to the web interface, use the newly assigned IP address in your web browser or use the Universal Plug and Play (UPnP) application to rediscover the Master AP.
