Commands J, K, and L

• 1 Commands J, K, and L
  • 1.1 jitc enable
  • 1.2 jitc show
  • 1.3 jumbo
  • 1.4 keep-alive-vlan
  • 1.5 keepalive
  • 1.6 keepalive (IKEv2)
  • 1.7 keychain
  • 1.8 key-id
  • 1.9 key-rollover-interval
  • 1.10 key-server-priority
  • 1.11 kill
  • 1.12 lacp-mode
  • 1.13 lacp-timeout
  • 1.14 lag
  • 1.15 lag-mac
  • 1.16 learn-default
  • 1.17 lease
  • 1.18 led
  • 1.19 legacy-inline-power
  • 1.20 legacy-inline-power (Interface)
  • 1.21 license delete perpetual
  • 1.22 license delete unit
  • 1.23 license install perpetual
  • 1.24 license set serial-number
  • 1.25 lifetime (IKEv2)
  • 1.26 lifetime (IPsec)
  • 1.27 link-config gig copper autoneg-control
  • 1.28 link-error-disable
  • 1.29 link-fault-signal
  • 1.30 link-keepalive ethernet
  • 1.31 link-keepalive interval
  • 1.32 link-keepalive retries
  • 1.33 linkdampen
  • 1.34 link-oam
  • 1.35 lldp advertise link-aggregation
  • 1.36 lldp advertise mac-phy-config-status
  • 1.37 lldp advertise management-address
  • 1.38 lldp advertise max-frame-size
  • 1.39 lldp advertise med-capabilities
  • 1.40 lldp advertise med-power-via-mdi
  • 1.41 lldp advertise port-description
  • 1.42 lldp advertise port-id-subtype
  • 1.43 lldp advertise port-vlan-id
  • 1.44 lldp advertise power-via-mdi
  • 1.45 lldp advertise system-capabilities
  • 1.46 lldp advertise system-description
  • 1.47 lldp advertise system-name
  • 1.48 lldp advertise vlan-name
  • 1.49 lldp enable ports
  • 1.50 lldp enable receive
  • 1.51 lldp enable snmp med-topo-change-notifications
  • 1.52 lldp enable snmp notifications
  • 1.53 lldp enable transmit
  • 1.54 lldp max-neighbors-per-port
  • 1.55 lldp max-total-neighbors
  • 1.56 lldp med fast-start-repeat-count
  • 1.57 lldp med location-id civic-address
  • 1.58 lldp med location-id coordinate-based
  • 1.59 lldp med location-id ecs-elin
  • 1.60 lldp med network-policy application
  • 1.61 lldp reinit-delay
  • 1.62 lldp snmp-notification-interval
  • 1.63 lldp tagged-packets
  • 1.64 lldp transmit-delay
  • 1.65 lldp transmit-hold
  • 1.66 lldp transmit-interval
  • 1.67 load-balance symmetric
  • 1.68 local-as
  • 1.69 local-certificate (PKI)
  • 1.70 local-identifier
  • 1.71 local-userdb
  • 1.72 log (OSPFv2)
  • 1.73 log-status-change
  • 1.74 logging
  • 1.75 logging buffered
  • 1.76 logging cli-command
  • 1.77 logging console
  • 1.78 logging enable (ACL)
  • 1.79 logging enable (PKI)
  • 1.80 logging enable config-changed
  • 1.81 logging enable ikev2
  • 1.82 logging enable ipsec
  • 1.83 logging enable rfc5424
  • 1.84 logging enable user-login
  • 1.85 logging facility
  • 1.86 logging host
  • 1.87 logging on
  • 1.88 logging persistence
  • 1.89 logging-rate-limit
  • 1.90 login-page
  • 1.91 logmgr clear-fetched-logs
  • 1.92 logmgr fetch
  • 1.93 logmgr list
  • 1.94 loop-detection
  • 1.95 loop-detection-interval
  • 1.96 loop-detection shutdown-disable
  • 1.97 loop-detection-syslog-interval
  • 1.98 lsdb-limit
  • 1.99 lsdb-overload-interval
  • 1.100 l2protocol dot1q-tunnel
  • 1.101 l2protocol dot1q-tunnel cos
  • 1.102 l2protocol dot1q-tunnel drop-threshold
  • 1.103 l2protocol dot1q-tunnel-mac
  • 1.104 l2protocol dot1q-tunnel shutdown-threshold