Access Point Management

• 1 Access Point Management
  • 1.1 AP Groups
    • 1.1.1 Working with AP Groups
    • 1.1.2 Creating an AP Group
  • 1.2 AP Provisioning and Swapping
    • 1.2.1 Working with AP Registration Rules
    • 1.2.2 Creating an AP Registration Rule
    • 1.2.3 Configuring Registration Rule Priorities
    • 1.2.4 AP MAC OUI Address
      • 1.2.4.1 Creating an AP MAC OUI Address
    • 1.2.5 Setting a Global Country Code
    • 1.2.6 Configuring the Tunnel UDP Port
    • 1.2.7 Provisioning and Swapping Access Points
    • 1.2.8 Options for Provisioning and Swapping APs
    • 1.2.9 Approving Access Points
    • 1.2.10 Approving Mesh APs
    • 1.2.11 Viewing Mesh APs
  • 1.3 Working with Access Points
    • 1.3.1 Moving a Single Access Point to a Different Zone
    • 1.3.2 AP Switchover
      • 1.3.2.1 Configuring AP Switchover
      • 1.3.2.2 Switch Over Managed APs and External DPs
    • 1.3.3 Rehoming Managed APs
      • 1.3.3.1 AP Auto Rehome
    • 1.3.4 Rebalancing APs
    • 1.3.5 Configuring Node Affinity
      • 1.3.5.1 Enabling Node Affinity
      • 1.3.5.2 Disabling Node Affinity
    • 1.3.6 Triggering a Preferred Node
  • 1.4 Configuring Access Points
    • 1.4.1 Configuring Access Points
    • 1.4.2 Access Point and Zone Configuration Options
      • 1.4.2.1 General Options
      • 1.4.2.2 Mesh Options
      • 1.4.2.3 Band Combination Options
      • 1.4.2.4 Band/Spectrum Configuration
      • 1.4.2.5 AP GRE Tunnel Options
      • 1.4.2.6 Syslog Options
      • 1.4.2.7 AP SNMP Options
      • 1.4.2.8 Cellular Options
      • 1.4.2.9 Advanced Options
        • 1.4.2.9.1 Swap Configuration
          • 1.4.2.9.1.1 Editing Swap Configuration
    • 1.4.3 Advanced Security Options for ITSAR Compliance
      • 1.4.3.1 Configuring the Advanced Security Options for ITSAR Compliance
    • 1.4.4 Power Source in AP Configuration
    • 1.4.5 AP CLI Scripts
      • 1.4.5.1 AP CLI Scripts
      • 1.4.5.2 Uploading AP CLI Scripts
      • 1.4.5.3 Executing AP CLI Scripts
      • 1.4.5.4 Scheduling AP CLI Scripts
      • 1.4.5.5 Viewing Scripts
      • 1.4.5.6 Viewing the Script Execution Summary
  • 1.5 AP Model Specific Configuration
    • 1.5.1 AP Model Specific Configuration
      • 1.5.1.1 LED Advanced Mode
      • 1.5.1.2 LED Off Delay
      • 1.5.1.3 Configuring LED Off Delay for an AP
      • 1.5.1.4 Power Profile Optimization for Wi-Fi 7 APs
        • 1.5.1.4.1 Assigning a Power Profile on Wi-Fi 7 Access Points
    • 1.5.2 Configuring Model-Based Settings
    • 1.5.3 Configuring the Port Settings of a Particular AP Model
    • 1.5.4 AP Ethernet Ports
      • 1.5.4.1 Creating an Ethernet Port Profile
      • 1.5.4.2 Designating an Ethernet Port Type
      • 1.5.4.3 Access Ports
      • 1.5.4.4 Trunk Ports
      • 1.5.4.5 General Ports
    • 1.5.5 Link Aggregation Protocol (LACP)
      • 1.5.5.1 Link Aggregation Control Protocol (LACP) support for R720 AP
      • 1.5.5.2 Enabling the LACP Support for a Zone
      • 1.5.5.3 Enabling LACP Support for an AP
      • 1.5.5.4 Enabling LACP Support for an AP Group
        • 1.5.5.4.1 Creating a Bond Port Profile
  • 1.6 Radio Band Features
    • 1.6.1 Band or Spectrum Configuration
    • 1.6.2 Auto Cell Sizing
    • 1.6.3 ChannelFly and Background Scanning
    • 1.6.4 BSS Coloring
    • 1.6.5 Band Balancing
    • 1.6.6 Client Load Balancing
    • 1.6.7 Automated Frequency Coordination System
      • 1.6.7.1 AFC Power Modes
      • 1.6.7.2 RUCKUS AFC System Architecture
      • 1.6.7.3 How RUCKUS AP Geolocation Works
      • 1.6.7.4 Mobile Applications
      • 1.6.7.5 Enabling Automated Frequency Coordination from SmartZone
      • 1.6.7.6 Checking Automated Frequency Coordination Status
    • 1.6.8 Multi Link Operation (MLO)
  • 1.7 AP Services
    • 1.7.1 DHCP & NAT
      • 1.7.1.1 AP Based DHCP or NAT
      • 1.7.1.2 Network Topology
      • 1.7.1.3 Hierarchical Network Topology
      • 1.7.1.4 Configuring AP-based DHCP Service Settings
      • 1.7.1.5 Creating an AP DHCP Pool
      • 1.7.1.6 Configuring DHCP Server or NAT Router with Mesh Options
    • 1.7.2 Domain Name System (DNS)
      • 1.7.2.1 Creating a DNS Server Profile
      • 1.7.2.2 Creating a DNS Spoofing Profile
    • 1.7.3 Managing AP Certificates
    • 1.7.4 Restricted Access Overview
  • 1.8 AP Status
    • 1.8.1 AP Status
    • 1.8.2 SCI Thresholds for each AP
    • 1.8.3 Monitoring the Network
    • 1.8.4 Viewing Managed Access Points
    • 1.8.5 Monitoring Access Points
    • 1.8.6 Viewing General AP Information
    • 1.8.7 Viewing LLDP Neighbors
      • 1.8.7.1 Supported LLDP Attributes
    • 1.8.8 Tagging Critical APs
    • 1.8.9 Working with Maps
      • 1.8.9.1 Importing a Floorplan Map
      • 1.8.9.2 Viewing RF Signal Strength
      • 1.8.9.3 Monitoring APs Using the Map View
    • 1.8.10 Viewing AP Health Indicators
    • 1.8.11 Health
      • 1.8.11.1 Health
        • 1.8.11.1.1 Understanding Cluster and AP Health Icons
        • 1.8.11.1.2 Customizing Health Status Thresholds
          • 1.8.11.1.2.1 Customizing AP Flagged Status Thresholds
        • 1.8.11.1.3 Using the Health Dashboard Map View
        • 1.8.11.1.4 Configuring the Google Map API Key Behavior
    • 1.8.12 Viewing AP Performance
    • 1.8.13 Viewing AP Connection Failures
    • 1.8.14 AP Traffic Indicators
      • 1.8.14.1 Viewing AP Traffic Indicators
      • 1.8.14.2 Traffic Analysis for Wireless Clients
      • 1.8.14.3 Customizing Traffic Analysis
      • 1.8.14.4 Configuring Traffic Analysis Display for APs
      • 1.8.14.5 SmartCell Insight Report on Actual Traffic Rate for APs and Client
    • 1.8.15 Neighbor APs
      • 1.8.15.1 Viewing Neighbor APs in a Non-Mesh Zone
    • 1.8.16 Reports
      • 1.8.16.1 Rogue Devices
        • 1.8.16.1.1 Viewing Rogue Devices
        • 1.8.16.1.2 Marking Rogue Access Points
        • 1.8.16.1.3 Locating a Rogue Device
      • 1.8.16.2 Historical AP Client Stats
        • 1.8.16.2.1 Viewing AP Client Statistics
    • 1.8.17 External Syslog Server
      • 1.8.17.1 External Syslog Server
  • 1.9 AP Wireless Clients
    • 1.9.1 AP Wireless Clients
    • 1.9.2 Wireless Clients
    • 1.9.3 Deauthorizing a Wireless Client
    • 1.9.4 Blocking a Wireless Client
    • 1.9.5 Unblocking a Wireless Client
    • 1.9.6 Disconnecting a Wireless Client
    • 1.9.7 Viewing a Summary of Wireless Clients
    • 1.9.8 Viewing Wireless Client Details
    • 1.9.9 Traffic Analysis for Wireless Clients
      • 1.9.9.1 Adjusting the Traffic Analysis Display for Top Clients
      • 1.9.9.2 SmartCell Insight Report on Actual Traffic Rate for APs and Client
  • 1.10 AP Wired Clients
    • 1.10.1 Wired Clients
    • 1.10.2 Viewing a Summary of Wired Clients
    • 1.10.3 Deauthorizing a Wired Client
  • 1.11 AP Upgrade
    • 1.11.1 AP Firmware Version
    • 1.11.2 Changing the AP Firmware Version of the Zone
    • 1.11.3 Scheduling a Zone Firmware Upgrade
    • 1.11.4 Uploading an AP Patch File
    • 1.11.5 Troubleshooting with AP Firmware Files
    • 1.11.6 Secure Boot